Turin-area auto and tier plants still move kits between machining, plating, assembly and warehouse. Flash rust starts in those multi-day holds when free volume stays open. Goods-in fails when kit IDs do not match packing lists. A global manufacturer specifies multimetal VCI film for mixed-metal kits after dry clean, VCI stretch for unitised cartons, anti-static VCI only when ESD modules sit in the same programme, and aluminium barrier free volume with desiccant when sealed life later includes multi-week ocean humidity.
| Step | Pass rule | If skip |
|---|---|---|
| 1. Dry clean | No free water or process residue at seal | Rust under closed bag |
| 2. Multimetal free volume | Bag or wrap closed on the kit | Open poly through warehouse days |
| 3. Kit ID on bag and list | Same code at goods-in | Line stop and mis-pick |
| 4. Stretch after bag | Unitise cartons only after free volume exists | Stretch-only pallets on bare metal |
| 5. Barrier if ocean weeks | Barrier free volume + desiccant with VCI | Film-only long export stains |
Mixed steel and plating free volume for multi-day kanban holds.
View Full Specs
Unitising bagged cartons between Piedmont plants.
View Full Specs
Only when ESD rules apply to modules in the set.
View Full Specs
With VCI and desiccant when multi-week export sealed life applies.
View Full SpecsMilan is Lombardy capital goods free volume. Stuttgart is German auto clean pack volume. Turin is Piedmont auto supply with kanban-style multi-day holds and mixed plating kits.
Open free volume during kanban warehouse days, stretch-only pallets without part bags, and wrong grade on mixed steel and plated kits.
Yes when bare metal sits multi-day before the next plant. Open poly is not a vapour system.
When sealed life includes multi-week ocean humidity after port exit for export programmes.
Grade-tied MIL-PRF-22019E and NACE TM0208 documentation where applicable, SDS, ISO certificates and a method note covering hold days and kit IDs.
No. BENZ is a global protective packaging manufacturer.
Kit IDs must match packing lists so goods-in can reconcile without opening every bag.
No. Use anti-static VCI only when ESD rules apply to electronics modules in the set. Multimetal VCI is the default corrosion free volume.
Share plant pair, kanban hold days, metal and plating list, kit label rules and export path if any. The reply should name film form, seal method and whether barrier plus desiccant are required.
Call us directly: +91 98991 44488 | [email protected]